Sanken CSR-2
This new "Rear Rejection Microphone" is a unique directional microphone that is particularly suitable for special conditions where most microphones fail. The CSR-2 has a very strongly suppressed rear. In other words, the sound coming from behind is significantly suppressed. At 500Hz, this can be as much as 26dB! This makes sound recording in a busy café, stadium, or other noisy environments much easier. The CSR-2 provides a solution for various sound engineers in challenging situations.
The CSR-2 uses three microphone capsules, with a traditional capsule used for mid and high frequencies and two others for mid and low frequencies. The Rear Rejection feature can also be turned off, giving you a standard directional microphone at your disposal.
Specifications | |
---|---|
Directivity | Mid-High: lobar Mid-Low: Rear rejection by second gradient two capsules |
Transducer | Back electret condenser x 3 |
Frequency range | 70Hz - 18kHz |
Sensitivity (nominal at 1kHz) | 71mV/Pa (-23dB, 0dB=1V/Pa) |
Equivalent noise level (A-weighted) | Rear rejection ON: 16dB SPL Rear rejection OFF: 15dB SPL |
Max SPL (1% THD) | 123dB SPL |
Output impedance at 1KHz | 150 ohms |
Powering | +48 +/- 4V phantom |
Current consumption | 4.5mA |
Weight | 170g |
Dimensions | 250mm x 22mm (diameter) |
Surface finish | matte black |
Connector | XLR-3M |
Product specifications
- Article number
- SanConCSR-6033
- SKU
- CSR-2