Collection

QAVS [A80360] pendulum joint for boom poles. Ensures stable horizontal alignment of setups like A-RAY and Stereo Bar.

Compact hydrophone with 48V phantom power for underwater recording. Omnidirectional, frequency range 70 Hz – 20 kHz, waterproof up to 100 m. Includes cable.

TOP TIP ECO accessory for boompole. Holds NEUTRIK XLR or plug-on transmitter securely. Reduces rattling and movement. Mounts on top of boompole.

[U-BACK-M-BE] Back Strap Medium – Beige Stretch strap 80–100 cm with vertical pouch for regular thickness transmitters; gripper stops slipping under clothes.

AC Alligator Clip holder for Voice Technologies VT500/506 lavalier microphones, for attaching the microphone securely to clothing during audio recording.

[VT506WATER/O] Black omnidirectional lavalier microphone with water-resistant construction, 1.5 m cable, RF protection and complete VTO box with accessories.

[VT500BLACK/O] Omnidirectional lavalier microphone with wide response, slight high-frequency emphasis, flexible 1.5 m cable and VTO box with accessories.

toupettape - hairpiece tape 50 strips, size 1/2 inch x 3 inch

Timecode cable. BNC to mini coax connector, 3mm, 40cm. For Ultrasync One input or output.

Dual slot-in ENG receiver, wideband 76MHz tuning bandwidth

[LTBATELIM-H] Battery eliminator with locking Hirose 4-pin connector for LT, M2R, M2Ra, DCHR, DCHT, DBu and DBu-LEMO, 5-25 V DC input and mounting screws

40106-1 rechargeable lithium-ion battery (LB-50) for Lectrosonics SSM and IFBR1B; 1000 mAh, 3.7 V; up to 8 hours runtime.

[170113] W 5 D hollow foam windshield for 20 mm end-address microphones. For stronger wind and airflow noise during boom movements, with a plastic carrier.

[170301] W 140 blue / Foam windscreen for Schoeps MiniCMIT and CMIT 5 microphones. Length 135 mm, for reducing wind noise around the microphone in light wind.

TC 2 [165014] double miniature table stand for two CCM or KC microphones, with tilt adjustment and cable routing.

STR 600 [165010] 600 mm support rod, 3/8" threads, fits BF 250 and RC/RL tubes, 12 mm aluminium.

STR 250 [165006] 250 mm support rod, 3/8" threads, fits BF 250 and RC/RL tubes, 12 mm aluminium.

STR 100 [165002] aluminium support rod, 100 mm with 3/8" threads, for use with BF 250 and RC/RL tubes.

[133509] TM S 250 C 250 mm gooseneck fitted between an MK capsule and a CMC microphone amplifier. Allows a Colette table microphone to be aimed at the speaker.

[123503] RL 700 700 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

[123501] RL 1200 1200 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

PSD 42 [153502] power supply for AES42 microphones with digital phantom power, includes AC adapter.

[170105] B 5 foam pop screen for 20 mm microphones. For speech at normal speaking distances and light wind with omnidirectional capsules. Anthracite gray.

[170102] B 1 D compact hollow pop shield for 20 mm end-address Schoeps microphones. Reduces speech plosives with an enclosed air volume around the capsule.