Collection

[121708] CCM 4XP K compact cardioid speech microphone for distances below 10 cm, with proximity-effect compensation. With fixed 5 meter XLR cable and SGC.

[121703] CCM 4VP L compact side-address cardioid speech microphone with low-frequency attenuation for distances below 20 cm. With 5 meter XLR cable and SGC.

[121103] CCM 4V L compact side-address cardioid condenser microphone with a gentle treble lift. With 5 meter XLR cable, SGC clamp and wooden storage case.

[121011] CCM 2S L compact omnidirectional microphone with a gentle treble lift for AB stereo and Decca Tree. With 5 meter XLR cable, SGC and wooden case.

[042507] SX-ES84 EQ+ADC analogue mixing console with eight inputs, eight three-band EQ modules, four mix buses and an ADC for eight digital audio channels.

SX-ST8D/6-C compact modular analogue mixing console with six input modules and three blank panels, supplied with a mains power supply for 100–240 VAC.

[KIT-4060-OP-LMK] 4060 CORE+ lavalier kit with omnidirectional microphone, MicroLock, XLR adapter, clip and two grids for interviews, presentations and speech.

3U 10.5 inch Vented Panel for MiniCart or Production SoundCart

PIN-11 – holder with safety pin for Sanken COS-11D and COS-11DR lavaliers. Provides secure and discreet attachment to clothing.

RM-11C Rubber Mount with Clip – mount for COS-11D and COS-11DR lavaliers, with integrated clip. Available only in black (black only).

HC-11V Holder Clip (vertical) – clip for COS-11D and COS-11DR lavaliers. Keeps the microphone in vertical position for secure attachment.

OR-436 X-Large Hard Shell Boom Pole Case – rigid case with padded interior and Velcro straps. Fits extra-long boom poles up to approx. 108 cm.

KS40 Pair of standard rubber suspension mounts for K-Tek K-SM and K-SSM shock mounts. Replacement parts for worn or damaged microphone suspension components.

KE110CC Avalon aluminium boompole from 79 to 279 cm with five sections, internal coiled cable and straight XLR3M bottom output. With a 3/8"-16 male thread.

SD-2 – Adapter for one Sony NPF (L-Series) battery on Sound Devices MixPre-3/6, fits directly into the sled connector.

NP-50 – 50Wh lithium-ion NP1 battery with 14.4V output, compact design, and compatibility with Hawk-Woods NP1 chargers. Clearance. Only ONE available.

AD-5 – Hirose 4-pin to 2x Hirose 4-pin Female 30 cm adapter cable, ideal for powering multiple accessories from a single Hirose power source.

[LEO-25] Leonard windscreen for Sennheiser MKH40/50 (Ø25 mm), including LEO-FUR fur for effective wind reduction with high acoustic transparency.

[LEO-22 a] Leonard windscreen for Neumann KM100 series (Ø21.8 mm), including LEO-FUR fur for effective wind reduction with high acoustic transparency.

[PIANI-2-4017C-CCM8] PIANISSIMO MS windshield for DPA 4017C and Schoeps CCM 8 L. Includes suspension, XLR5 output, fur windshield and transport protection.

[PIANI-2-CMCCUT1-CCM8] MS windshield for Schoeps CMC with CUT 1 and CCM 8 L. Includes suspension, XLR5 output, fur windshield and transport protection.

[BBI-WKS-XS] The Windkiller XS Short-haired plug-on windshield with 55 mm internal length for ø18–24 mm microphones. For outdoor recording in moderate wind.

[GLE-12W] Isolated 12W DC/DC converter and Ground Loop Eliminator, 9–18 V DC input to 12 V DC output, 1 A, 86% efficiency, Hirose 4-pin connectors.

[10375] MixAssist MixPre-6 II automixes microphone levels in the mix, leaving pre-fader ISO tracks unaffected. Enter your serial number when ordering.