Collection

M2C-L active antenna combiner with eight BNC inputs and one output. Combines RF signals from four M2T units into one antenna, covering 470.100–692 MHz.

[139008] Stereo-Set CMC 6, MK 2S omnidirectional XLR microphone set with matched capsules for A/B stereo. Includes SG 20, B 5 and a wooden storage case.

Adapter for lavalier mics with 5-pin Switchcraft (TA5F). Converts 48V phantom to 5.6V electret. XLR output. Compatible with Lectrosonics mics.

Adapter for lavalier mics with miniJack (3.5 mm). Converts 48V phantom to 5.6V electret. Balanced XLR output. For Sennheiser Evolution and similar mics.

[123502] RL 350 350 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

[170701] PS 4 gray foam hygiene cover for Schoeps CMH handheld microphones. Replaceable cover for the microphone head, intended for hygiene during shared use.

[133005] KC 5 active Colette cable, 5 metres long, between an MK capsule and microphone amplifier. With 3 mm cable, impedance conversion and SGC swivel mount.

[152004] K 5 LU 5-metre adapter cable for Schoeps CCM-L microphones and CMC 1 L, from Lemo to XLR3M. With Neutrik EMC connector and included cable strap.

[161005] AMS 22 elastic suspension for two Colette microphones in an MS setup. Includes a swivel and thread adapters for 3/8-inch and 1/2-inch stand mounting.

[143002] CMH 641 supercardioid condenser microphone for speech and vocals. With built-in pop filter, XLR output, SGH clamp, PS 4 cover and wooden storage case.

[131019] MK 5 Colette microphone capsule, mechanically switchable between omni and cardioid for instruments, vocals and speech. Amplifier not included.

[139002] Stereo-Set CMC 6, MK 2H matched omnidirectional microphones for A/B and orchestral recording. With certificate, SG 20, B 5 and wooden storage case.

[139007] Stereo-Set CMC 6, MK 5 Colette stereo microphone set, switchable between omni and cardioid. With matched capsules, windscreens and wooden storage case.

[121104] CCM 4V K compact side-address cardioid microphone with a gentle treble lift. With fixed 5 meter XLR cable, SGC clamp and wooden storage case.

WM-1e – foam windscreen for the Sanken CS-1e shotgun microphone. 1 piece, compact and lightweight, reduces wind noise and breath sounds.

WS-11 Metal Windscreen – metal windscreen for COS-11D and COS-11DR lavaliers. Available in black, grey, beige and white. Reduces wind and breath noise.

KSRB2 Stingray Rain Bib for use with a Stingray harness. Rain protection for your audio bag during location recording, designed for quick deployment.

DV-MC2 – 2-channel fast charger for NP-F and Mini DV batteries with 1.8A charging current per channel and universal mains input.

[PIANI-2-MKH30/40-D] Dedicated MS windshield for MKH 30 with MKH 40 or MKH 50. With fixed suspension, XLR5 output, fur windshield and transport shell.

[MIN-02951] Mini-ALTO ORTF 180 Front Pod, 90 mm: magnetic front section to replace or extend an existing Mini-ALTO windshield for ORTF microphone setups.

[MIN-02982] Mini-ALTO ORTF 180 Replacement Fur Windcover: grey replacement fur cover for the ORTF 180 windshield, for wind protection during outdoor recording.

[NIM-00759] 7cm Sanken CS-M1 Nimbus Windshield (19/22), Black Fur: black slip-on windshield with open-cell foam and synthetic fur for outdoor recording.

[NIM-00742] 5cm MKH50 Nimbus Windshield (24/25), Black Fur: black slip-on windshield with open-cell foam and synthetic fur for use in light to moderate wind.

[NIM-00780] 18cm Nimbus Windshield (19/22), Black Fur: black slip-on windshield for 19–22 mm microphones, combining open-cell foam and synthetic fur.