Hawk-Woods

NP-98D – 98Wh lithium-ion NP1 battery with 14.4V output and data communication, compatible with Sound Devices mixers.

SD-1 – Hirose DC input sled for Sound Devices MixPre-3/6, supports 10–20 V input via 4-pin Hirose for external power

[SA-95] 95 Wh lithium-ion battery (14.4 V) with SMBus and LED display. Compact smart battery for recorders, carts an...

[SA-95] 95 Wh lithium-ion battery (14.4 V) with SMBus and LED display. Compact smart battery for recorders, carts and power distribution.

[AA-HP36-10] 3.6V lithium-ion AA batteries (type B14500) 10-pack with 1100 mAh and 3 C discharge rate. Compatible wi...

[AA-HP36-10] 3.6V lithium-ion AA batteries (type B14500) 10-pack with 1100 mAh and 3 C discharge rate. Compatible with Sound Devices A20-TX.

[AA-HP36-4] 3.6V lithium-ion AA batteries (type B14500) 4-pack with 1100 mAh and 3 C discharge rate. Compatible with...

[AA-HP36-4] 3.6V lithium-ion AA batteries (type B14500) 4-pack with 1100 mAh and 3 C discharge rate. Compatible with Sound Devices A20-TX.

[SA-K1] Smart Audio Battery Introduction Bundle with SA-95 battery (95 Wh, 14.4 V) and SA-C1 charger. Complete start...

[SA-K1] Smart Audio Battery Introduction Bundle with SA-95 battery (95 Wh, 14.4 V) and SA-C1 charger. Complete starter pack for location audio power.

BP-MX2 – 2-channel BPU charger with 3A current per channel, compact and quiet operation due to ventilated casing.

BP-98UX – 98Wh lithium-ion battery with BP-U mount, 14.4V output voltage, and two D-Tap outputs for accessories.

SD-4 – External MDV battery fitting with 30 cm cable, used with SD-1 Hirose sled on Sound Devices MixPre-3/6.

[SA-C1] Single-channel smart audio charger (14.4 V, 2 A) with 5-pin SMBus and LED status. Compatible with Hawk-Woods...

[SA-C1] Single-channel smart audio charger (14.4 V, 2 A) with 5-pin SMBus and LED status. Compatible with Hawk-Woods and other smart batteries for field use.

SD-2 – Adapter for one Sony NPF (L-Series) battery on Sound Devices MixPre-3/6, fits directly into the sled connector.

BP-75U – 75Wh 14.4V lithium-ion BP-U battery with original battery contacts and built-in charge level indicator.

NP-ATM4 – 4-channel NP1 fast charger with 60W XLR output, LED indicators, and leather carry handle.

VL-CA4X – V-Lok camera adapter with 4x Hirose and 1x D-Tap (12V, 50W), featuring soft-start and self-resetting fuses.

NP1 Adaptor shoe - 2x TA4 + master switch, for Data Batteries

VL-MX1 – 1-channel 3A Mini V-Lok fast charger with LED indicator and silent fanless operation.

BP-50UX – 50Wh 14.4V lithium-ion BP-U battery with original battery contacts and built-in charge level indicator.

NPU-SQN4S – NP1 adapter with 4 switched Hirose outputs, voltage indicator and selectable 9.6V/12V output, weight 87 g.

NP-SQN Adapter / 4 Switched Auxillary

NPB-SQN4S – NP1 adapter with 4 switched Hirose outputs, LED indicator and regulated 12V output.

NPU-TA4 – NP1 adapter with TA4 output, 12V regulated and 4 Hirose connectors, compatible with Sound Devices Scorpio.

RP-MX2 – 2-channel 2A simultaneous charger for mini Reel Power batteries, silent design with LED charge indicator.

BL-4X4 – 4-channel B-Mount charger with 2.5A current per channel, charges four batteries simultaneously in approximate...

BL-4X4 – 4-channel B-Mount charger with 2.5A current per channel, charges four batteries simultaneously in approximately 4 hours.

BL-98 – 98Wh lithium-ion battery with B-Mount interface, provides 26V output voltage and direct communication with ARR...

BL-98 – 98Wh lithium-ion battery with B-Mount interface, provides 26V output voltage and direct communication with ARRI equipment.